Our combined tests see components tested over 500,000 grueling times. All for a brighter future.

TESLA Professional Washers

Save up to 50% on water – automatically. They can even talk and text message you.

TELSA Professional  high-speed extraction washers minimize drying time and provide significant electrical and gas savings. Self-service laundries benefit from faster throughput (freeing up dryers, folding tables and parking spots) which creates higher profits. Your customers can even receive a text message notifying them when their wash is done and ready for unloading! Increase your profits and create customers for life with the unique features of Electrolux Professional washers.

Excellence-Badge

Engineered to Save. Built to Last.

AS (Automatic Savings) – Save up to 50% on water with AS, automatically. With every wash cycle, AS determines the actual weight of the load and adds precisely the right amount of water significantly reducing water consumption and energy costs.

  • Extremely low water & energy consumption
  • Convenient four compartment detergent box
  • Large, secure coin box
  • High extraction force removes more water, saving energy & time in dryer
  • Heavy-duty with robust steel door & lock, hinges set wide apart & door locked through entire wash cycle
  • Stainless and galvanized steel in all vital parts for maximum rust protection
  • SuperBalance guarantees the correct extraction force, longer machine life
  • Single phase electrical for easy installation & lower costs
  • Drain pump option
  • Text messaging option
  • Voice guidance option
Tesla Professional, 200G Washers
8kg
14kg
20kg
Capacity (kg)
9
14
20
Width (mm)
660
720
750
Depth (overall) (mm)
722
787
914
Height (mm)
1133
1216
1345
Height to bottom of door (mm)
355
365
435
Door opening diameter (mm)
310
365
395
Cylinder volume (ln)
85
130
180
Drain outlet diameter (mm)
75
75
75
Height to centerline of drain (mm)
103
103
103
Extract (rpm/G-Force)
830 / 200
776 / 200
742 / 200
Dynamic floor load (lb/kN)
1.7 +/ -2.6
2.3 +/- 3.8
3 +/- 4.8
Dynamic frequency (Hz)
13.8
12.9
12.4
Noise level (dBA) in extraction
<75
<72
<74
Crated width – (mm)
690
750
780
Crated depth – (mm)
830
950
995
Crated height – (mm)
1219
1350
1434
Crated weight (kg)
126
169
238
Electrical Requirements (standard)
Voltage/frequency/phase
208-240/60/1 or 3~
208-240/60/1 or 3~
208-240/60/1 or 3~
Power (kW) / Full-load current (A) / Ckt breaker (A)
0.5 / 2.4 / 15
0.8 / 3.9 / 15
0.9 / 4.3 / 15
Voltage/frequency/phase
120/60/1
120/60/1
120/60/1
Power (kW) / Full-load current (A) / Ckt breaker (A)
0.6 / 5.0 / 15
0.9 / 7.5 / 15
1.0 / 8.3 / 15
Water Information
Inlet fittings (* = 3 inlets)
DN20
DN20
DN20*
Flow (lpm @ 45 psi) (each inlet)
20
20
20
Recommended water pressure (psi/kPa)
200-600
200-600
200-600
Approx Water usage (liters @ full load)
41
62
90
Modified Energy Factor
2.1
2.2
2.3
Water Factor (Gal per cycle/drum volume)
4.0
3.9
4.0
Refer installation and servicing to qualified, licensed personnel. Always read installation and operating manuals and consult local codes before installation. Protect machines with properly rated, common-trip, circuit breakers ONLY. Warranty void if not properly installed. Solid-mount machines require a concrete foundation, and are not suitable for upper-floor or above-basement installations. Contact us for more information and for availability of machines for electric services not listed. Specifications subject to change without notice. Laundrylux assumes no responsibility for errors or omissions in this information.

Speed Soak inner drum:  large perforation and spray lifters

Economy
the best dewatering/extraction (water passes out of the drum faster), leading to low water retention, savings in energy in drying
water optimization as you have the same level of water in the inner drum as in the outer drum (see picture on next slide)

Optimal wash and rinse process
fast soaking of garments through large holes, catalyzed by the spray lifters, leads to more time for the actual wash process, as well as better flushing at rinse

Less wear and tear/damage of garments fast soaking reduces the mechanical action on dry garments countersunk holes: no wear and tear

Hygiene
Good pass through out of the drum of Rigid particles (particularly relevant for nursing homes, facility management)

Trouble-free operation through robust design and intelligence

  • Riveted assembly, flexible in case of bad foundation
  • Requires solid foundation (steel, concrete)
  • Optimal for basement, first floor, and all moving installations (ships)
  • Galvanized steel in all parts, for optimal protection against rust and corrosion
  • Drum assembly rests on heavy steel springs and shock absorbers
  • Perfectly balanced for low noise level -71dB and smooth operation
  • Optimal for all types of installations, wooden floors, 10th floor, etc
  • Galvanized steel in all parts, for optimal protection against rust and corrosion
  • Rigid construction of the back gable and bearing housing
  • Cone shaped back gable on inner drum: brings the bearing housing closer to the movement, reducing wobbling and stress on the bearings

Benefits of AS – Automatic Savings system

  • Water savings: up to 50% in case machine is half loaded
  • Energy savings: less water needs to be heated
  • Detergent savings for automatic dosing of detergent according to the weight of the load, ED system
  • Economical & Environmentally friendly
  • Short extraction at program start determines the actual weight of the garments (in dry state) Software built into the wash program adjusts the amount of water to the actual weight of the load.
Previous tab Next tab

It's about reliability. Making the right decisions now, benefits your family, business and your future.